Section Guide & Glossary
Please use the following chart and guide as a guide to make sure you get the right section for you pole. If you have any doubts please contact us and we will help.
Glossary
Poles
- Power Top 2 Kit
- A kit consisting of 2 sections made from heavy grade carbon, these sections are designed to be used with heavy elastic when fishing for carp. The Kits are the equivalent in length to a match top 3 kit and fit directly onto your number 4 section.
- No 1 Power
- The number 1 section to the power top 2 kits.
- No 2 Power
- The Number 2 section to the power top 2 kits.
- Big Bore Power Kit
- Long Number 1 that fits directly onto the number 3 section of selected Daiwa poles, to be used in conjunction with heavier elastics
- Match Top 3 Kit
- A kit consisting of the first 3 sections of your pole, these kits are designed for using with lighter elastics and are usually included inside your pole when purchased.
- Match Top 4 Kit
- As above but including the number 4 section in the kit.
- Match Top 5 Kit
- As above but including the number 5 section in the kit.
- Universal Top Kit
- Universal Power, match and cupping kits available, these kits are designed to enable them to fit with most poles, from most manufactories. Please be aware that the term universal is used very lightly and is not guaranteed to fit every pole due to the varying dimensions of pole sections. If you are unsure as to whether the universal kits will fit your pole, please contact us and we will try to point you in the right direction.
- Short Number 4
- the short number 4 is half the length of a conventional number 4 section. It is designed to be used when fishing in the margins to give the pole extra strength. Can be used when at distance to give the pole extra rigidity
- Number 4 Power
- A heavier duty number 4 section designed to be used when using heavy elastics.
- Short Extension
- Fits onto the butt section of the pole, designed to be sat on when feeding, adds an extra half a meter to the pole
- Generic Kit
- Both power and match kits designed to fit a number of poles within a manufactories range. These kits mainly apply to Daiwa and Preston poles and all the poles which are compatible with the generic kits are listed. If you are unsure as to weather you pole is compatible with the Generic kits, please contact us
^ top
Shimano
^ top
Daiwa
^ top
Fox
^ top
Map/Leeda
^ top
Preston
^ top